潤滑油招商加盟1、要考慮到潤滑脂的防銹處理特性 應用于滾動軸承內的植物油脂務必具備防銹處理實際效果,防銹油最好是能不溶解水.植物油脂應具備優良的粘合力,并能夠在不銹鋼板材表層產生一層層浮油.
To consider the anti-rust treatment characteristics of grease, vegetable oils used in rolling bearings must have the actual effect of anti-rust treatment. The best anti-rust oil is insoluble water. Vegetable oils should have excellent adhesion and can produce a layer of oil slick on the surface of stainless steel sheets.
2、考慮潤滑油的機械穩定性
2. Considering the Mechanical Stability of Lubricating Oil
油脂在機械加工時會變軟,導致泄露.正常運行時,油脂會由軸承座甩到軸承內.如果油脂的機械穩定性不夠,運轉過程中,會使油脂的皂的結構產生機械性崩解,造成油脂被破壞,從而失去潤滑作用.
Oil will soften during mechanical processing, leading to leakage. Normally, oil will be thrown from the bearing seat to the bearing. If the mechanical stability of oil is not enough, the structure of oil soap will be mechanically disintegrated during operation, causing oil to be destroyed, thus losing lubrication.
3、考慮潤滑油的油封
3. Oil Seals Considering Lubricating Oil
油封是必需的保護軸承和潤滑劑免受外來污染的屏障,軸承運轉過程中,不論雜物或濕氣都不能滲入軸承內,以防造成對其破壞.
Oil seal is a necessary barrier to protect bearings and lubricants from external pollution. During the operation of bearings, no matter sundries or moisture can penetrate into bearings to prevent damage.
正確的安裝保養是發揮軸承最長使用壽命的重要因素.同時,必須注意軸承的清潔度、軸承選擇的正確性和選用適當?shù)陌惭b與保養工具.另外,軸承必須防止受到污染物和濕氣的污染,并保證有正確的被安裝和潤滑.故軸承配列的設計、油封的狀況、潤滑劑的型式及潤滑周期,乃至專門的保養皆扮演著相同而又重要的角色.
Correct installation and maintenance is an important factor for the longest service life of bearings. At the same time, attention must be paid to the cleanliness of bearings, the correctness of bearing selection and the selection of appropriate installation and maintenance tools. In addition, bearings must be prevented from contamination by pollutants and moisture, and ensure correct installation and lubrication. Period and even special maintenance play the same and important role.
4、考慮潤滑油的混合
4. Consider the mixing of lubricants
決不要把不能相容的油脂混用,如果兩種不相容的油脂混用,通常其稠度會變軟,最后可能會因油脂容易流失而造成軸承的損壞.如果你不知道軸承原先使用的是哪一種潤滑脂,則必須先徹底清除軸承內外的舊油脂,方可添加新油脂.http://www.69ltm4.cn
Never mix incompatible oils. If two incompatible oils are used together, their consistency will usually soften and eventually the bearing may be damaged due to the easy loss of grease. If you do not know which kind of grease the bearing used to be, you must thoroughly remove the old grease inside and outside the bearing before adding new grease.